89289 Plus Air Suspension Kit Compatible with Air Lift LoadL…

Price: $289.99
(as of Oct 13, 2024 17:38:29 UTC – Details)

Product Description

Plus Air Suspension Kit

Part Number:

89289

Compatible with Air Lift LoadLifter Ultimate 5000:

Compatible with 2024 DODGE RAM 2500Compatible with 2023 DODGE RAM 2500Compatible with 2022 DODGE RAM 2500Compatible with 2021 DODGE RAM 2500Compatible with 2020 DODGE RAM 2500Compatible with 2019 DODGE RAM 2500Compatible with 2018 DODGE RAM 2500Compatible with 2017 DODGE RAM 2500Compatible with 2016 DODGE RAM 2500Compatible with 2015 DODGE RAM 2500Compatible with 2014 DODGE RAM 2500Compatible with 2024 RAM 2500Compatible with 2023 RAM 2500Compatible with 2022 RAM 2500Compatible with 2021 RAM 2500Compatible with 2020 RAM 2500Compatible with 2019 RAM 2500Compatible with 2018 RAM 2500Compatible with 2017 RAM 2500Compatible with 2016 RAM 2500Compatible with 2015 RAM 2500Compatible with 2014 RAM 2500

BUILDING THE AIR SPRING ASSEMBLIES

1. Set a roll plate over the top of each air spring.

*NOTE: The radiused (rounded) edge of the roll plate will be toward the air spring so that the air spring is seated inside both roll plates.

2. Install the swivel fitting into the top of the air spring finger tight plus one and a half turns. Repeat for both air springs.

3. Place two air springs in front of you, with the joints facing you.

4. Insert the 3/8″ carriage bolt through the upper air spring bracket in the hole at the back side only.

*NOTE: The upper air spring brackets will be a mirror image when set onto the air springs.

5. Attach both brackets to the gas spring and attach with 3/8″ button head screws. Torque to no more than 20 lb-ft (27 Nm).

6. Install the large flat washer onto the lower bracket with 3/8” hex-head bolt, 3/8”flat washer (M) and 3/8”nylon lock nut as shown. Tighten securely.

7. Insert the 3/8″ long body bolt into the square hole in the lower bracket.

8. Set a roll plate over the bottom of the air spring and install the lower brackets onto the air spring assembly so that the large washer previously installed will be forward of the axle once installed using the 3/8”flat head screws. Torque to no more than 20 lb.-ft. (27Nm).

Part Number 89289
Compatible with Dodge RAM 2500 & RAM 2500 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Up to 5,000 pounds of load leveling capability
Exclusive internal jounce bumper inside, springs absorb shock
Note: Does not fit vehicles equipped with factory air suspension.If you need help with installation, please contact us